Medical Alert Special offer kit – Includes:

All the items in the standard kit further below, as well as these items that were shown in the video tutorial:

  • 2 – WS4938 single button wireless fobs
  • EVL-4CG internet module
  • 40 feet of 4 conductor security alarm wire(used for wiring to the keypad and plug-in transformer)
  • 12 foot pre made Cat5e cable(used for wiring from a port on your internet router to the EVL4 unit)
  • 10 b-connectors for attaching wires together(may not be needed, unless adding siren or additional security hardware to the system)
  • 10 drywall plugs and drywall screws

 

This kit would be good for someone who is going to use mainly wireless zones and is comfortable programming a 5501 style keypad.  This RFK5501 has a wireless receiver built into the keypad, while the PC 1616 panel has room for 6 hardwired zones on board.  The full kit includes:

1 – DSC PC1616 Control Panel with metal enclosure(no lock and key for enclosure), which features:

  • 6 on-board zones
  • Expandable to 16 hardwired zones
  • Expandable to 32 wireless zones
  • 2 Partitions
  • 48 User codes

1 – RFK5501 icon keypad

1 – DSC LC-100-PI motion detector with pet immunity up to appx. 50 pounds

1 – 15 watt indoor siren, as it appears in main photo

1 – 12 VDC 4 AH back-up system battery

1 – 16 VAC, 40 VA plug-in transformer

1 – Telephone block

1 – WS4939 4 button wireless keyfob

 

This system can be set-up for professional monitoring using a standard phone line or cell towers(additional hardware needed for cell).  It can also report to your smartphone using the EVL-4 internet modules.  Check our Security Course for full set-up and programming instructions.

 

Please keep in mind that this metal enclosure is the smaller variety without pre-drilled holes on the side of the enclosure.  If you are planning on using an EVL-4 module, zone expander or other small circuit board mounted on the side, you’ll have to mark and drill the holes yourself.

Scroll to Top